Respuesta :
Answer:
Total contraction on the bar = 1.238 mm
Explanation:
Modulus of Elasticity, E = 85 GN/m²
Diameter of the aluminium bar, [tex]d_{Al} = 40 mm = 0.04 m[/tex]
Load, P = 160 kN
Cross sectional area of the aluminium bar without hole:
[tex]A_1 = \frac{\pi d_{Al}^2 }{4} \\A_1 = \frac{\pi 0.04^2 }{4}\\A_1 = 0.00126 m^2[/tex]
Diameter of hole, [tex]d_h = 30 mm = 0.03 m[/tex]
Cross sectional area of the aluminium bar with hole:
[tex]A_2 = \frac{\pi( d_{Al}^2 - d_{h}^2)}{4} \\A_2 = \frac{\pi (0.04^2 - 0.03^2) }{4}\\A_2 = 0.00055 m^2[/tex]
Length of the aluminium bar, [tex]L_{Al} = 600 mm = 0.6 m[/tex]
Length of the hole, [tex]L_h = 100mm = 0.1 m[/tex]
Contraction in aluminium bar without hole [tex]= \frac{P * L_{Al}}{A_1 E}[/tex]
Contraction in aluminium bar without hole [tex]= \frac{160*10^3 * 0.6}{0.00126 * 85 * 10^9 }[/tex]
Contraction in aluminium bar without hole = 96000/107100000
Contraction in aluminium bar without hole = 0.000896
Contraction in aluminium bar with hole [tex]= \frac{P * L_{h}}{A_2 E}[/tex]
Contraction in aluminium bar without hole [tex]= \frac{160*10^3 * 0.1}{0.00055 * 85 * 10^9 }[/tex]
Contraction in aluminium bar without hole = 16000/46750000
Contraction in aluminium bar without hole = 0.000342
Total contraction = 0.000896 + 0.000342
Total contraction = 0.001238 m = 1.238 mm
